Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
Q-2, r. 4.1 - Clean Air Regulation
Section 183
Disposition versions
183. The operator of a ferro-alloy production process referred to in section 180 must, at least once every 3 years, perform source emissions testing of the gases emitted into the atmosphere by the process, calculate the particle emission rate, and for that purpose, measure each of the parameters necessary for the calculation.
In addition, the operator must carry out the first sampling and calculation within 1 year as of 30 June 2011 in the case of an existing ferro-alloy plant or, in the case of a new plant, within 1 year as of the date on which it is put into operation.
183. The operator of one or more furnaces used to produce a ferro-alloy referred to in section 180 must, at least once every 3 years, perform source emissions testing of the gases emitted into the atmosphere by the process, calculate the particle emission rate, and for that purpose, measure each of the parameters necessary for the calculation.
In addition, the operator must carry out the first sampling and calculation within 1 year as of 30 June 2011 in the case of an existing ferro-alloy plant or, in the case of a new plant, within 1 year as of the date on which it is put into operation.
